# EV Charger
If your plant is equipped with an EV charger, after binding the EV charger with the virtual plant, you can manage and maintain it in the following path:
- On the homepage, tap Plant, to go to the plant list page. Find your plant and tap to enter it.
- Within your plant, go to Device>EV Charger to find your EV charger.
# Device Details
The AC EV charger details page below is taken as an example to show what it consists of.
Description of EV charger details page:
| SN | Name | Description |
|---|---|---|
| a | Basic device information | Displays the device name, device status, device model, device SN, and device image. |
| b | Data refresh | You can view the last data refresh time and set the page refresh interval. Multiple options available. |
| c | Statistics analysis | A trend chart will be generated after you set parameters and time dimensions. |
| d | Charging record | Check the daily charging records after selecting a day. |
Note: The DC EV charger details page might vary with functions, which should be subject to the actual situations.
# Device Maintenance
Within your plant, go to Device>EV Charger to find your EV charger. With a tap of Manage, you can perform the following maintenance operations:
- Edit or modify your EV charger name.
- View device SN, device model and device status.
- Start the EV charger.
- Check the version of software running in the charger and upgrade them remotely.
- (If needed) Select the EMS for your charger according to the actual wiring.
- Set the charging gear and mode.
- Make an appointment for charging. All operations automatically enabled, no manual operations needed.
Note: The DC EV charger details page might vary with functions, which should be subject to the actual situations.