Automation Scenario

This section introduces the method for setting automation scenarios. Automation scenarios include recommended scenarios and custom scenarios.

Recommended Scenario

We offer 5 recommended scenarios according to market requirements: Price Tracking, Max Neg Price Gain, Disaster Warning (support America and Japan only now), and Off-power Warning (support Africa only), and Winter Backup Switch. The recommended scenarios you see may vary with country/region, device type, model and others, which shall be subject to the actually displayed page. The following shows how to apply a recommended scenario by taking Price Tracking and Winter Backup Switch as examples.

Example 1: Price Tracking

Example 2: Winter Backup Switch

If you do not want apply a scenario any more, tap Applications and find the scenario card. Tap it to enter its detail page and tap Delete in the upper right corner.

Custom Scenario

Under the guidance of the image below, create a custom scenario:

Specially note that, in "step 2 creating action" (see image below), after specifying a device to be controlled, you can let it execute a certain action, for example charge or discharge; run in a specific work mode (you can set the minimum SOC for self-use and feed-in priority work modes and the target SOC for backup mode); or switch on/off a SolaX or Shelly load.

Also specially note that, in "step 4 setting cycle mode" (see image below), two cycle modes of daily cycle and weekly cycle are available.

If you do not want apply a scenario any more, tap Applications and find the scenario card. Tap it to enter its detail page and tap Delete in the upper right corner.